Installation Guide
Tools Needed:
- Phillips screwdriver
- Level
- Drill with 6mm bit
- Wire strippers
- Electrical tape
- Measuring tape
Step-by-Step Installation
- Choose Installation Location: Select a location on an interior wall approximately 1.5m from floor, away from direct sunlight and heat sources.
- Turn Off Power: Ensure main power to the air conditioning system is switched off at the circuit breaker.
- Mounting Plate Installation: Secure the mounting plate to the wall using provided screws and wall anchors.
- Wiring Connection: Connect communication wires according to wiring diagram (typically 2-4 wire connection).
- Controller Attachment: Align controller with mounting plate and snap into place securely.
- Power Restoration: Restore power at circuit breaker and wait for controller to initialize.
- System Configuration: Follow on-screen prompts to configure system settings and pair with indoor unit.
Specifications
| Model Series | BRC1E63 / BRC1E52 / BRC1D63 |
| Type | Wall-mounted Controller |
| Color | White / Silver |
| Display Type | LCD with Backlight |
| Control Method | Wired / Wireless (RF) |
| Communication Protocol | Daikin Intelligent Touch Manager (DITM) |
| Power Supply | 24V AC (from indoor unit) / Battery (wireless models) |
| Temperature Range | 16°C - 30°C (60°F - 86°F) |
| Operating Temperature | 0°C - 50°C (32°F - 122°F) |
| Dimensions (HxWxD) | 86 x 86 x 25 mm |
| Weight | 150 g |
| Wireless Range | Up to 30 meters (line of sight) |
Warranty Information
- Full Warranty: 3 years parts and labor
- Extended Coverage: Optional 5-year warranty available
- Battery Warranty: 1 year for wireless controller batteries
For warranty service, contact Daikin Customer Service at 1-800-432-1342 or visit Daikin.com
Key Features
Intelligent Touch Control
Responsive touch interface with intuitive icons and clear display for easy operation of all air conditioning functions.
Wi-Fi Connectivity
Optional Wi-Fi module allows remote control via smartphone app, enabling temperature adjustment and scheduling from anywhere.
7-Day Programmable Timer
Set different temperature schedules for each day of the week to optimize comfort and energy efficiency.
Energy Consumption Display
Monitor real-time and historical energy usage to help reduce electricity costs and environmental impact.
Auto Changeover
Automatically switches between cooling and heating modes based on room temperature and setpoint.
Quiet Operation Mode
Special setting reduces fan speed and compressor operation for ultra-quiet performance during sleep or meetings.
Operating Modes Explained
Cooling Mode
Standard air conditioning operation with adjustable temperature and fan speed settings
Heating Mode
Heat pump operation for efficient space heating during colder months
Dry Mode
Dehumidification function that reduces humidity without significant cooling
Fan Mode
Circulates air without cooling or heating, with multiple fan speed options
Auto Mode
Intelligent mode that automatically selects cooling or heating based on room conditions
Eco Mode
Energy-saving operation that optimizes performance for maximum efficiency
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller display blank | Power loss, wiring issue, battery dead (wireless) | Check power supply, verify wiring connections, replace batteries |
| No response to touch | Screen lock enabled, system error, communication failure | Unlock screen, reset controller, check communication wiring |
| Temperature reading incorrect | Sensor calibration needed, location issues, interference | Recalibrate sensor, relocate controller, remove heat sources nearby |
| Wi-Fi connection lost | Network issues, incorrect settings, module failure | Check router, reconfigure Wi-Fi settings, reset module |
| Error code displayed | System malfunction, communication error, sensor failure | Note error code and refer to service manual, contact technician |
| Buttons beep but no action | Communication loss with indoor unit, system lockout | Check wiring, reset system, verify indoor unit power |
Common Error Codes
- E1/E2: Room temperature sensor error - Check sensor connection
- E3: Communication error - Verify wiring between controller and indoor unit
- E5: System overcurrent - Check electrical components
- E6: Compressor error - Contact service technician
- E7: Outdoor fan motor error - Check fan operation
- EA: Power supply error - Verify voltage and connections
- U0: Refrigerant shortage - Check for leaks and charge
- U4: Indoor/outdoor communication failure - Check communication wiring
Manual Downloads
Current Model Controllers
BRC1E63
Wired Wall Controller
BRC1E52
Wireless Wall Controller
BRC1D63
Wi-Fi Enabled Controller
BRC1E71
Touch Screen Controller
Compatible System Manuals
FTXS Series
Wall-mounted Air Conditioners
VRV-S Series
Multi-split Systems
ATXS Series
Cassette Type Units
FDXS Series
Ducted Units