DeLonghi Pinguino Air Conditioner

User Manual & Installation Guide

Portable Air Conditioner Series

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Screwdrivers (flat and Phillips)
  • Measuring tape
  • Window installation kit (included)
  • Level

Step-by-Step Installation

  1. Choose Installation Location: Select a location near a window and electrical outlet on a flat, stable surface.
  2. Prepare Window Kit: Adjust the window slider panel to fit your window dimensions and secure it in place.
  3. Connect Exhaust Hose: Attach the exhaust hose to the rear of the unit and connect to the window adapter.
  4. Secure Window Seal: Ensure the window is properly sealed to prevent warm air from entering the room.
  5. Electrical Connection: Plug into a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Position the Unit: Place the unit at least 50cm from walls and furniture for proper airflow.
  7. Test Operation: Turn on the unit and run through all modes to ensure proper operation.
Warning: All installations must be performed according to local regulations. Ensure proper ventilation and drainage setup.

Specifications

Model Series PAC EX130 / PAC AN140
Type Portable Air Conditioner
Color White / Silver
Cooling Capacity 13,000 BTU / 14,000 BTU
Room Coverage 450-550 sq. ft.
Noise Level 52-65 dB
Control Type Digital Display with Remote Control
Energy Rating A (Energy Efficient)
Dehumidification Up to 2.5 liters/hour
Power Requirements 115V, 60Hz, 12A
Dimensions (HxWxD) 75 x 45 x 35 cm
Weight 32 kg
Refrigerant R410A (Eco-friendly)

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Compressor Warranty: 5 years on compressor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact DeLonghi Customer Service at 1-800-322-3848 or visit DeLonghi.com

Key Features

3-in-1 Functionality

Cooling, dehumidifying, and fan functions in one portable unit. Easily switch between modes to suit your comfort needs throughout the year.

Auto Evaporation System

Advanced auto-evaporation technology reuses condensation to cool the unit, reducing the need for manual water drainage in most conditions.

24-Hour Timer

Program the unit to turn on or off automatically with the 24-hour programmable timer, helping to save energy and ensure comfort when you need it.

Sleep Mode

Quiet operation with gradual temperature adjustment for undisturbed sleep. Fan speed automatically reduces for minimal noise.

Washable Air Filter

Removable and washable air filter captures dust and particles, improving air quality and making maintenance simple and cost-effective.

Portable Design

Easy-roll casters and compact design allow you to move the unit between rooms as needed. No permanent installation required.

Operating Modes Explained

Cooling Mode

Primary cooling function with adjustable temperature settings from 64°F to 86°F (18°C to 30°C)

Dehumidify Mode

Removes excess moisture from the air without overcooling the room

Fan Only Mode

Circulates air without cooling, with three fan speed settings

Auto Mode

Automatically selects cooling or fan operation based on room temperature

Sleep Mode

Gradually adjusts temperature and reduces fan speed for quiet nighttime operation

Turbo Mode

Maximum cooling power for quick temperature reduction

Troubleshooting

Problem Possible Cause Solution
Unit won't turn on Power issue, full water tank, timer setting Check power supply, empty water tank, check timer settings
Poor cooling performance Dirty filter, blocked exhaust, room too large Clean air filter, check exhaust hose, ensure proper room size
Water leakage Full water tank, improper installation, high humidity Empty water tank, check installation, use continuous drainage
Loud operation Uneven surface, loose parts, dirty filter Place on level surface, check for loose parts, clean filter
Remote control not working Dead batteries, signal obstruction, distance Replace batteries, ensure clear line of sight, move closer
Error codes displayed Various system issues Refer to error code section below, contact service if needed

Error Codes

  • E1: Room temperature sensor error - Contact service center
  • E2: Evaporator temperature sensor error - Contact service center
  • E3: Water tank full - Empty water collection tank
  • E4: Overheating protection - Turn off, wait 10 minutes, restart
  • E5: Communication error - Check remote control batteries
  • E6: Fan motor error - Contact service center

Manual Downloads

Current Model Manuals

PAC EX130

13,000 BTU Portable AC

PAC AN140

14,000 BTU Portable AC

PAC EL120

12,000 BTU Eco Portable AC

PAC N90

9,000 BTU Silent Portable AC

Popular Previous Models

PAC T110

11,000 BTU Portable AC

PAC C85

8,500 BTU Compact AC

PAC N77

7,700 BTU Silent AC

PAC L100

10,000 BTU Lite AC

Note: For models not listed here, please visit the DeLonghi Support Website for complete documentation.