Installation Guide
Tools Needed:
- Drill with hole saw attachment
- Screwdrivers (flat and Phillips)
- Wire strippers and crimpers
- Sealant gun
- Measuring tape
- Level
- Multimeter
Step-by-Step Installation
- Roof Preparation: Select a suitable location on the RV/marine roof, ensuring adequate structural support and clearance from obstructions.
- Cut Opening: Using the provided template, cut the roof opening to the specified dimensions using appropriate safety equipment.
- Install Roof Curb: Secure the roof curb assembly using appropriate fasteners and seal thoroughly with butyl tape and sealant.
- Electrical Connection: Connect power wiring according to local electrical codes. Ensure proper grounding and circuit protection.
- Thermostat Wiring: Run low-voltage thermostat wires from the control panel to the air conditioner unit location.
- Unit Placement: Carefully lift the air conditioner unit onto the roof curb, aligning mounting points and electrical connections.
- Secure Unit: Fasten the unit securely using the provided hardware, ensuring even pressure distribution.
- Ductwork Connection: Connect interior ductwork to the air distribution box, ensuring airtight seals.
- Test Operation: Power up the system and test all functions including cooling, fan speeds, and thermostat operation.
Specifications
| Model Series | PENGUIN II / Brisk II |
| Type | Roof-Mounted RV Air Conditioner |
| Cooling Capacity | 13,500 BTU/h |
| Air Flow (High) | 320 CFM |
| Power Requirements | 115V, 60Hz, 12.5A |
| Power Consumption | 1,440 Watts |
| Refrigerant Type | R-410A |
| Noise Level | 58 dB (Low Speed) |
| Dimensions (LxWxH) | 27.5 x 27.5 x 12.5 inches |
| Weight | 78 lbs |
| Roof Opening | 14 x 14 inches |
| Control Type | Digital Thermostat with Remote Option |
Warranty Information
- Compressor Warranty: 2 years limited warranty
- Parts Warranty: 1 year limited warranty
- Labor Coverage: 90 days from installation
- Extended Coverage: Optional extended warranties available
For warranty service, contact Dometic Customer Service at 1-800-544-4881 or visit Dometic.com
Key Features
Vortex Air Distribution
Advanced airflow technology creates a vortex effect that circulates cool air evenly throughout the RV interior, eliminating hot spots and improving comfort.
Low Profile Design
Streamlined design reduces wind resistance and improves fuel efficiency while maintaining optimal cooling performance and durability.
Quiet Operation
Specially designed compressor mounting and fan system reduces vibration and noise for peaceful operation during day and night use.
Easy Maintenance Access
Removable filter panels and accessible components simplify routine maintenance and filter cleaning without requiring roof access.
Multi-Speed Control
Three fan speeds (Low, Medium, High) plus Auto mode allow customized comfort control and energy efficiency optimization.
All-Weather Protection
UV-resistant housing and weatherproof seals protect internal components from sun, rain, and environmental elements.
Operating Modes
Cool Mode
Standard cooling operation with temperature control and adjustable fan speeds
Fan Only Mode
Circulates air without cooling for ventilation and air circulation
Auto Mode
Automatically adjusts fan speed based on temperature differential for optimal efficiency
Eco Mode
Energy-saving operation that maintains comfort while reducing power consumption
Dehumidify Mode
Reduces humidity while maintaining comfortable temperature levels
Sleep Mode
Gradually adjusts temperature and reduces fan speed for quiet nighttime operation
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit not turning on | Power supply issue, tripped breaker, thermostat setting | Check power source, reset breaker, verify thermostat settings |
| Poor cooling performance | Dirty filters, low refrigerant, restricted airflow | Clean/replace filters, check for obstructions, verify refrigerant charge |
| Water leakage inside RV | Clogged drain line, improper installation angle | Clear drain line, ensure proper unit leveling and sealing |
| Unusual noises | Loose components, debris in fan, worn bearings | Tighten mounting hardware, clear debris, inspect fan assembly |
| Fan runs but no cooling | Compressor issue, thermostat problem, electrical fault | Check compressor operation, test thermostat, verify electrical connections |
| Short cycling | Dirty coils, refrigerant issue, thermostat location | Clean condenser coils, check refrigerant charge, relocate thermostat if needed |
Error Codes
- E1: Room temperature sensor fault - Check sensor connection
- E2: Evaporator temperature sensor fault - Inspect sensor and wiring
- E3: High pressure fault - Check condenser airflow and cleanliness
- E4: Low pressure fault - Verify refrigerant charge and system integrity
- E5: Compressor overload - Allow unit to cool, check electrical supply
- E6: Communication error - Check control board connections
- E7: Fan motor fault - Inspect fan motor and capacitor
Manual Downloads
Current Model Manuals
Dometic Brisk II
13,500 BTU RV AC
Dometic Penguin II
15,000 BTU Low Profile
Dometic FreshJet
11,000 BTU Compact
Dometic Marine AC
16,000 BTU Marine
Popular Previous Models
Dometic Brisk Air
13,500 BTU Standard
Dometic Penguin
15,000 BTU Original
Dometic Duo-Therm
11,000 BTU Classic
Dometic Polar White
10,000 BTU Compact