Installation Guide
Tools Needed:
- Power drill with hole saw
- Jigsaw
- Screwdrivers (flat and Phillips)
- Wire strippers/crimpers
- Measuring tape
- Sealant gun
- Level
Step-by-Step Installation
- Choose Installation Location: Select a location on the RV roof with adequate structural support and clear of obstructions.
- Prepare Roof Opening: Mark and cut the roof opening according to the template provided in the installation kit.
- Install Roof Curb: Secure the roof curb to the RV roof using appropriate fasteners and seal with RV roof sealant.
- Electrical Connection: Connect to a dedicated 120V, 60Hz, 20A circuit. Follow all local electrical codes.
- Mount Air Conditioner: Lift the air conditioner unit onto the roof curb and secure with provided fasteners.
- Connect Ductwork: Connect the duct system to the air conditioner's plenum for proper air distribution.
- Install Interior Components: Mount the thermostat and control panel according to instructions.
- Test System: Test the air conditioner in cooling and fan modes to ensure proper operation.
Specifications
| Model Series | PENGUIN II |
| Type | Roof Mount RV Air Conditioner |
| Color | White / Low Profile |
| Cooling Capacity | 15,000 BTU/h |
| Airflow (High Speed) | 320 CFM |
| Control Type | Digital Thermostat with LCD Display |
| Energy Efficiency Ratio (EER) | 10.5 |
| Power Requirements | 115V, 60Hz, 13.5A |
| Dimensions (LxWxH) | 28.5 x 27.5 x 12.5 inches |
| Weight | 78 lbs |
| Operating Voltage Range | 108-132V |
| Refrigerant Type | R-410A |
Warranty Information
- Full Warranty: 2 years parts and labor
- Compressor Warranty: 5 years on sealed refrigeration system
- Additional Coverage: Optional extended warranty available
For warranty service, contact Dometic Customer Service at 1-800-544-4881 or visit Dometic.com
Key Features
Low Profile Design
Streamlined design reduces wind resistance and improves fuel efficiency while maintaining optimal cooling performance.
Quiet Operation
Advanced compressor technology and optimized fan design minimize operational noise for a more comfortable RV experience.
Multi-Speed Fan
Three fan speeds allow for customized airflow and noise levels, from maximum cooling to quiet nighttime operation.
Easy Start Technology
Reduces starting current draw by up to 65%, making it compatible with smaller generators and reducing strain on electrical systems.
Heat Strip Option
Optional electric heat strip provides supplemental heating during cooler weather without running the furnace.
Ducted Air Distribution
Efficient duct system ensures even cooling throughout the RV, eliminating hot spots and improving comfort.
Operating Modes
Cool Mode
Standard cooling operation with temperature control and adjustable fan speeds
Fan Only Mode
Circulates air without cooling, perfect for ventilation and air circulation
Auto Mode
Automatically switches between cooling and fan operation to maintain set temperature
Economy Mode
Optimizes energy consumption by adjusting compressor cycles for efficient operation
Sleep Mode
Gradually increases temperature overnight for comfortable sleeping and energy savings
Dehumidify Mode
Reduces humidity while minimizing temperature drop for comfort in humid conditions
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Air conditioner won't start | Power issue, thermostat setting, circuit breaker | Check power supply, verify thermostat settings, reset circuit breaker |
| Poor cooling performance | Dirty filters, low refrigerant, restricted airflow | Clean or replace filters, check for refrigerant leaks, clear obstructions |
| Unit cycles on/off frequently | Dirty condenser, thermostat location, electrical issue | Clean condenser coils, relocate thermostat if in direct sunlight, check voltage |
| Water leaking inside RV | Clogged drain tube, improper installation, frozen evaporator | Clear drain tube, check installation angle, check for ice buildup |
| Unusual noises | Loose components, debris in fan, bearing wear | Tighten all fasteners, clear debris from fan, check motor bearings |
| Error code on display | System fault, sensor failure, communication error | Refer to error code chart in manual, reset system, check connections |
Error Codes
- E1: Room temperature sensor fault - Check sensor connection
- E2: Evaporator temperature sensor fault - Check sensor and wiring
- E3: High pressure fault - Check condenser airflow and refrigerant
- E4: Low pressure fault - Check for refrigerant leaks
- E5: Compressor overload - Check voltage and compressor condition
- E6: Communication error - Check thermostat wiring and connections
- E7: Fan motor fault - Check fan motor and capacitor
Manual Downloads
Current Model Manuals
PENGUIN II 15K
15,000 BTU Low Profile
Brisk II 15K
15,000 BTU Standard Height
PENGUIN II 13.5K
13,500 BTU Low Profile
Brisk II 13.5K
13,500 BTU Standard Height
Popular Previous Models
PENGUIN 15K
15,000 BTU (Previous Generation)
Brisk Air 15K
15,000 BTU (Previous Generation)
Duo-Therm 15K
15,000 BTU Penguin Series
Polar White 13.5K
13,500 BTU Standard Model