Installation Guide
Before You Begin:
- Check compatibility with your Fujitsu air conditioner model
- Ensure remote control batteries are fresh
- Clear line of sight between remote and AC unit
- Keep original remote as backup
Step-by-Step Setup
- Battery Installation: Open battery compartment on back of remote, insert 2 AAA batteries observing correct polarity.
- Power On: Press any button to activate remote. LED indicator should flash once.
- Model Selection: Use code search function or enter specific code for your Fujitsu AC model (see code list in specifications).
- Pairing Test: Point remote at AC unit from up to 8 meters away, press power button to test connection.
- Function Verification: Test all basic functions: temperature adjustment, mode selection, fan speed, and timer settings.
- Advanced Setup: Program specialized functions like sleep mode, economy mode, and swing control if available.
- Final Check: Ensure all functions work properly and remote responds consistently.
Specifications
| Model Series | AR-RV1A / AR-RV2B |
| Type | Universal Infrared Remote Control |
| Color | White / Black |
| Compatible Models | Fujitsu ASYG, ASTG, ARYG series and most 2010+ models |
| Operating Range | Up to 8 meters (26 feet) |
| Display Type | LCD with backlight (AR-RV2B only) |
| Power Source | 2 x AAA batteries (included) |
| Battery Life | Approximately 12 months with normal use |
| Dimensions | 15.5 x 5.5 x 2 cm |
| Weight | 85g (with batteries) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Infrared Wavelength | 940 nm |
Compatibility Codes
- 001-005: Fujitsu ASYG07/09/12/14/18LFC series
- 006-010: Fujitsu ASTG07/09/12/14/18LFC series
- 011-015: Fujitsu ARYG07/09/12/14/18LFC series
- 016-020: Fujitsu ASY20/24/30/36/42/48/60G series
- 021-025: Fujitsu wall-mounted units (2015-2020)
- Auto Search: Automatic code detection function
For compatibility verification, contact Fujitsu Support at 1-888-888-3424 or visit FujitsuGeneral.com
Key Features
Universal Compatibility
Compatible with most Fujitsu air conditioner models from 2010 onward, with programmable codes for specific series and functions.
Backlit Display
Easy-to-read LCD display with blue backlight for clear visibility in dark rooms or at night (AR-RV2B model).
One-Touch Functions
Dedicated buttons for frequently used functions: power, mode, temperature, fan speed, and timer settings.
Auto-Swing Control
Control vertical and horizontal air swing direction for optimal air distribution throughout the room.
Sleep Mode Programming
Program gradual temperature adjustments throughout the night for energy savings and comfort.
Timer Functions
24-hour programmable timer for automatic on/off operation to match your daily schedule.
Operating Modes Explained
Cool Mode
Standard cooling operation with adjustable temperature settings from 16°C to 30°C (61°F to 86°F)
Heat Mode
Heating operation for heat pump models with temperature range from 16°C to 30°C
Dry Mode
Dehumidification function that removes excess moisture while maintaining comfortable temperature
Fan Mode
Air circulation only without cooling or heating, with multiple fan speed options
Auto Mode
Automatic selection of cooling or heating based on room temperature for optimal comfort
Eco Mode
Energy-saving operation that optimizes performance for reduced power consumption
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working | Dead batteries, blocked signal, wrong code | Replace batteries, clear line of sight, reprogram with correct code |
| Intermittent operation | Weak batteries, distance too far, interference | Replace batteries, move closer to AC unit, remove obstacles |
| Wrong functions activated | Incorrect programming code | Reset remote and reprogram with correct model-specific code |
| Display not visible | Backlight off, display damaged, dead batteries | Press light button, replace batteries, check for physical damage |
| Buttons not responding | Battery corrosion, internal damage, locked remote | Clean battery contacts, check for damage, unlock remote |
| AC unit not responding | Remote not paired, AC unit power issue, sensor problem | Repair remote, check AC power supply, consult technician |
Error Indicators
- No display: Check battery installation and polarity
- Dim display: Replace batteries immediately
- Flashing display: Remote needs reprogramming
- No infrared signal: Test with camera phone - IR LED should be visible
- Button beep but no action: Reprogram with correct AC model code
- All functions erratic: Perform factory reset and reprogram
Manual Downloads
Current Remote Models
AR-RV2B
Universal Remote with Backlight
AR-RV1A
Basic Universal Remote
AR-RV3C
Advanced Programmable Remote
AR-DB1
Wall Controller Unit
AC Unit Specific Remotes
AR-RAC1E
For ASYG Series AC Units
AR-RAC2F
For ASTG Series AC Units
AR-RAC3G
For ARYG Series AC Units
AR-RAC4H
For Ceiling Cassette Units