Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe cutter
- Vacuum pump
- Manifold gauge set
- Torque wrench
Step-by-Step Installation
- Choose Installation Location: Select a location with proper clearance (minimum 15cm from ceiling, 10cm from walls) on a solid wall.
- Mount Indoor Unit Bracket: Securely mount the bracket to the wall using appropriate anchors for your wall type.
- Install Outdoor Unit: Place outdoor unit on a stable, level surface with proper ventilation clearance (minimum 30cm all sides).
- Connect Refrigerant Pipes: Connect copper pipes between indoor and outdoor units, ensuring proper insulation.
- Electrical Connection: Connect to a properly grounded power supply according to local electrical codes.
- Vacuum and Charge: Evacuate the system using a vacuum pump and charge with refrigerant according to specifications.
- Test Run: Run the air conditioner through all modes to check for proper operation and cooling/heating performance.
Specifications
| Model Series | ASYG07LMCA / ASUYG07LMCA |
| Type | Split System Air Conditioner |
| Color | White |
| Cooling Capacity | 2.0 kW (7,000 BTU/h) |
| Heating Capacity | 2.5 kW (8,500 BTU/h) |
| Noise Level (Indoor) | 19 dB - 37 dB |
| Control Type | Remote Control with LCD Display |
| Energy Rating | A+++ (Cooling) / A++ (Heating) |
| Power Requirements | 220-240V, 50Hz, 1Ph |
| Dimensions Indoor (HxWxD) | 29.5 x 79.8 x 21.5 cm |
| Dimensions Outdoor (HxWxD) | 53.5 x 72.0 x 28.4 cm |
| Refrigerant | R32 |
| Operating Temperature | -15°C to 46°C (Cooling) / -15°C to 24°C (Heating) |
Warranty Information
- Full Warranty: 5 years parts and labor
- Compressor Warranty: 7 years
- Additional Coverage: Optional extended warranty available
For warranty service, contact Fujitsu Customer Service at 1-800-223-3726 or visit Fujitsu-General.com
Key Features
Inverter Technology
Advanced DC inverter compressor adjusts power output to maintain desired temperature efficiently, reducing energy consumption by up to 30% compared to conventional units.
3D Airflow
Vertical and horizontal louvers move independently to distribute air evenly throughout the room, eliminating hot and cold spots for consistent comfort.
Plasma Quad Filter
Four-stage filtration system removes dust, pollen, odors, and bacteria, improving indoor air quality and creating a healthier environment.
Eco Mode
Intelligent energy-saving mode optimizes operation to reduce power consumption while maintaining comfort levels.
Wi-Fi Control
Connect to home Wi-Fi for remote control via smartphone app, allowing scheduling, monitoring, and control from anywhere.
Self-Cleaning Function
Automatic cleaning cycle dries the indoor unit's heat exchanger to prevent mold and bacteria growth, reducing maintenance needs.
Operating Modes
Cooling
Standard cooling operation with temperature range 18°C - 32°C
Heating
Heat pump operation with temperature range 16°C - 30°C
Dry
Dehumidification mode reduces humidity without overcooling the room
Fan
Air circulation only with 4 speed settings (Low, Medium, High, Auto)
Auto
Automatically selects cooling or heating based on room temperature
Sleep
Gradually adjusts temperature for optimal sleeping comfort
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't start | Power issue, remote control batteries dead, circuit breaker tripped | Check power supply, replace remote batteries, reset circuit breaker |
| Poor cooling/heating | Dirty filters, blocked airflow, refrigerant leak | Clean filters, clear obstructions, contact service technician |
| Water leaking indoors | Clogged drain pipe, improper installation | Clear drain pipe, ensure proper slope of drain line |
| Unusual noises | Loose parts, debris in fan, vibration | Tighten mounting screws, clear debris, check installation |
| Frozen indoor unit | Dirty filters, low refrigerant, fan malfunction | Clean filters, contact service for refrigerant check |
| Remote not working | Dead batteries, signal obstruction, sensor issue | Replace batteries, ensure line of sight, check sensor |
Error Codes
- E0: Protection device activated - Wait 3 minutes and restart
- E1: Indoor PCB issue - Contact service center
- E2: Sensor issue - Check temperature sensors
- E3: Drain pump issue - Check drain pump and float switch
- E4: Communication error - Check wiring between units
- E5: Overload protection - Reduce load or wait for reset
- E6: Fan motor issue - Check indoor fan motor
- E7: Outdoor unit issue - Contact service technician
Manual Downloads
Current Model Manuals
ASYG07LMCA
2.0kW Wall Mounted AC
ASYG09LMCA
2.6kW Wall Mounted AC
ASYG12LMCA
3.5kW Wall Mounted AC
ASYG18LMCA
5.0kW Wall Mounted AC
Popular Previous Models
ASTG09LMC
2.6kW Inverter AC
ASUG09LMC
2.6kW Heat Pump
ASYG24LMC
7.1kW Commercial AC
ASYG07KMCB
2.0kW Basic Model