Installation Guide
Before Use:
- Remove battery insulation tab
- Insert 2 AAA batteries (included)
- Ensure correct polarity (+/-)
- Point remote at AC unit
- Keep within 7 meters range
Step-by-Step Setup
- Battery Installation: Open battery compartment on back, insert 2 AAA batteries with correct polarity.
- Remote Pairing: Point remote at AC unit, press and hold "SET" button for 3 seconds until LED flashes.
- Initial Setup: Set current time using TIME button and +/- keys for accurate scheduling.
- Mode Selection: Choose between Cool, Heat, Dry, Fan, or Auto modes based on your needs.
- Temperature Setting: Use +/- buttons to set desired temperature (16°C - 30°C).
- Fan Speed: Adjust fan speed to Low, Medium, High, or Auto using FAN button.
- Test Operation: Test all functions to ensure proper communication with AC unit.
Specifications
| Model Series | MDRC-100 / Universal Series |
| Type | Infrared Remote Control |
| Color | White / Black |
| Compatibility | Most Midea AC models 2015-2023 |
| Operating Range | Up to 7 meters |
| Display Type | LCD with backlight |
| Battery Type | 2 x AAA (1.5V) |
| Battery Life | Approximately 12 months |
| Dimensions | 15.5 x 5.5 x 2 cm |
| Weight | 85g (with batteries) |
| Operating Temperature | -10°C to 50°C |
| Languages | English, Spanish, French |
Warranty Information
- Remote Control: 1 year limited warranty
- Batteries: 90 days from purchase
- Additional Coverage: Contact retailer for extended options
For warranty service, contact Midea Customer Service at 1-800-288-8612 or visit Midea.com
Key Features
Universal Compatibility
Works with most Midea air conditioner models from 2015 onward. Easy setup with automatic code search function.
LCD Backlight Display
Clear LCD display with blue backlight for easy viewing in dark conditions. Shows temperature, mode, timer, and settings.
24-Hour Timer
Program on/off times for energy savings. Set different schedules for weekdays and weekends.
Sleep Mode
Automatically adjusts temperature throughout the night for optimal comfort and energy efficiency while you sleep.
Turbo Mode
Rapid cooling/heating function that operates at maximum capacity for quick temperature adjustment.
Eco Mode
Energy-saving operation that optimizes performance while reducing power consumption by up to 30%.
Operation Modes Explained
Cool Mode
Standard cooling operation. Set desired temperature between 16°C - 30°C.
Heat Mode
Heating operation for winter use. Temperature range: 16°C - 30°C.
Dry Mode
Dehumidification function that removes excess moisture without overcooling.
Fan Mode
Circulates air without cooling/heating. Four speed settings available.
Auto Mode
Automatically selects cooling or heating based on room temperature.
Sleep Mode
Gradually adjusts temperature for overnight comfort and energy savings.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working | Dead batteries, blocked signal, wrong code | Replace batteries, clear line of sight, reprogram remote |
| AC not responding | Out of range, AC power off, signal interference | Move closer, check AC power, remove obstacles |
| Display dim or blank | Low batteries, display timeout | Replace batteries, press any button to wake |
| Buttons not responding | Battery corrosion, button damage | Clean battery contacts, contact service center |
| Incorrect temperature | Wrong mode, sensor issue, calibration needed | Select correct mode, clean AC filter, recalibrate |
| Timer not working | Incorrect time setting, power interruption | Reset time, reprogram timer settings |
Error Codes Display
- E1: Room temperature sensor error
- E2: Pipe temperature sensor error
- E3: Communication error with indoor unit
- E4: Communication error with outdoor unit
- E5: Overcurrent protection
- E6: Compressor overload protection
Manual Downloads
Current Model Manuals
MDRC-100
Universal AC Remote
MDRC-200
Smart AC Remote
MDRC-150
Basic AC Remote
MDRC-300
Wi-Fi AC Remote
Popular Previous Models
MRC-85
Standard AC Remote
MRC-90
LCD AC Remote
MRC-95
Advanced AC Remote
MRC-100
Universal Remote