Installation Guide
Tools Needed:
- Screwdrivers (flat and Phillips)
- Drill with bits
- Tape measure
- Level
- Utility knife
- Support bracket (if required)
Step-by-Step Installation
- Choose Installation Location: Select a window that can support the unit's weight and has a nearby electrical outlet.
- Prepare the Window: Remove the window sash and clean the window sill thoroughly.
- Install Support Bracket: If required, install the support bracket according to manufacturer instructions.
- Position the Unit: Carefully lift the air conditioner into the window opening, ensuring it sits level on the sill.
- Extend Side Panels: Extend the side panels to fill the window opening completely.
- Secure the Unit: Use the provided screws to secure the unit to the window frame and sill.
- Seal Gaps: Apply weather stripping or foam insulation around gaps to prevent air leaks.
- Electrical Connection: Plug into a dedicated 115V, 15A grounded outlet. Do not use extension cords.
- Test Operation: Turn on the unit and test all functions including cooling, fan, and thermostat.
Specifications
| Model Series | MAW10R1BWT |
| Type | Window Air Conditioner |
| Color | White |
| Cooling Capacity | 10,000 BTU |
| Room Size Coverage | Up to 450 sq. ft. |
| Noise Level | 52 dB (Low) / 56 dB (High) |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | Energy Star Certified |
| Energy Efficiency Ratio (EER) | 11.0 |
| Power Requirements | 115V, 60Hz, 8.7A |
| Dimensions (HxWxD) | 15.5 x 23.6 x 19.2 inches |
| Weight | 68.3 lbs |
| Refrigerant | R410A |
| Air Flow (CFM) | 290 (High) |
Warranty Information
- Full Warranty: 1 year parts and labor
- Sealed System Warranty: 5 years on compressor and cooling components
- Additional Coverage: Optional extended warranty available
For warranty service, contact Midea Customer Service at 1-888-339-6332 or visit Midea.com
Key Features
Energy Star Certified
Meets strict energy efficiency guidelines set by the EPA, saving you money on energy bills while reducing environmental impact.
Easy-to-Use Electronic Controls
Digital display with touch controls for precise temperature settings, timer functions, and mode selection.
Sleep Mode
Automatically adjusts temperature throughout the night for optimal comfort and energy savings while you sleep.
Auto Restart
Automatically resumes previous settings after a power outage, maintaining your comfort without manual resetting.
Multiple Fan Speeds
Three fan speeds (Low, Medium, High) plus Auto mode for customized airflow and comfort control.
Washable Filter
Easy-to-clean mesh filter traps dust and particles, improving air quality and cooling efficiency.
Operating Modes Explained
Cool Mode
Standard cooling operation with adjustable temperature settings from 62°F to 86°F
Energy Saver
Fan and compressor cycle off when desired temperature is reached, saving energy
Fan Only
Circulates air without cooling, perfect for mild days or improving ventilation
Dry Mode
Reduces humidity in the room for enhanced comfort during humid conditions
Auto Mode
Automatically switches between cooling and fan modes based on room temperature
Sleep Mode
Gradually increases temperature overnight for energy savings and comfort
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't turn on | Power issue, circuit breaker tripped, timer setting | Check power cord, reset circuit breaker, check timer settings |
| Poor cooling performance | Dirty filter, blocked airflow, thermostat setting | Clean filter, clear obstructions, set lower temperature |
| Water leaking inside room | Unit not tilted properly, drain holes blocked | Ensure unit tilts slightly outward, clear drain holes |
| Loud or unusual noises | Loose parts, debris in fan, unbalanced unit | Tighten screws, clear debris, ensure unit is level |
| Unit cycles on/off frequently | Dirty filter, thermostat issues, extreme outdoor temps | Clean filter, check thermostat, reduce heat sources |
| Ice forming on coils | Dirty filter, low refrigerant, restricted airflow | Clean filter, call for service, ensure proper airflow |
Error Codes
- E1: Room temperature sensor error - Check sensor connection
- E2: Evaporator temperature sensor error - Check sensor connection
- E3: Condenser temperature sensor error - Check sensor connection
- E4: Display communication error - Power cycle unit
- E5: Indoor/outdoor communication error - Check wiring
- E6: Compressor protection - Wait 3 minutes and restart
Manual Downloads
Current Model Manuals
MAW10R1BWT
10,000 BTU Window AC
MAW08R1BWT
8,000 BTU Window AC
MAW12R1BWT
12,000 BTU Window AC
MAW05R1BWT
5,000 BTU Window AC
Popular Previous Models
MWAC10000W
10,000 BTU Window AC
MWAC08000W
8,000 BTU Window AC
MWAC12000W
12,000 BTU Window AC
MWAC05000W
5,000 BTU Window AC