Installation Guide
Tools Needed:
- Screwdriver set
- Level
- Measuring tape
- Drill with bits
- Support bracket (if required)
Step-by-Step Installation
- Choose Installation Location: Select a window that can support the weight of the unit and has access to a dedicated electrical outlet.
- Prepare Window Area: Clean the window sill and ensure it's level. Remove any obstacles that might interfere with installation.
- Install Support Bracket: For larger units, install the support bracket according to manufacturer instructions for added stability.
- Position the Unit: Carefully place the air conditioner in the window opening, ensuring it sits level and secure.
- Secure the Unit: Extend the side panels to fill the window gap and secure them with screws provided.
- Seal the Gaps: Use weather stripping or foam insulation to seal any gaps between the unit and window frame to prevent air leaks.
- Electrical Connection: Plug into a dedicated 115V, 15A grounded outlet. Do not use extension cords or power strips.
- Test Operation: Turn on the unit and test all functions including cooling, fan speeds, and thermostat settings.
Specifications
| Model Number | RAV-SM562UT-E |
| Type | Window Air Conditioner |
| Color | White |
| Cooling Capacity | 6,000 BTU |
| Room Coverage | Up to 250 sq. ft. |
| Noise Level | 52 dB |
| Control Type | Electronic Controls with Remote |
| Energy Rating | Energy Star Certified |
| Power Requirements | 115V, 60Hz, 15A |
| Dimensions (HxWxD) | 14.5 x 20.5 x 17.5 inches |
| Weight | 58 lbs |
| Refrigerant | R-410A |
Warranty Information
- Full Warranty: 1 year parts and labor
- Compressor Warranty: 5 years
- Sealed System: 5 years
For warranty service, contact Toshiba Customer Service at 1-800-631-3811 or visit ToshibaAC.com
Key Features
Inverter Technology
Toshiba's advanced inverter compressor adjusts cooling power to maintain consistent temperature while reducing energy consumption by up to 40% compared to conventional units.
Sleep Mode
Automatically adjusts temperature throughout the night for optimal comfort and energy savings while you sleep.
Auto Restart
Automatically resumes previous settings after a power outage, ensuring continuous comfort without manual intervention.
Dehumidification Mode
Removes excess moisture from the air without overcooling the room, perfect for humid days.
Multiple Fan Speeds
Four fan speed settings (Low, Medium, High, Auto) allow customized airflow for different comfort needs.
Energy Saver Mode
Automatically turns off the fan when the desired temperature is reached, saving energy while maintaining comfort.
Operating Modes Explained
Cool Mode
Standard cooling operation with temperature control from 64°F to 86°F
Dry Mode
Dehumidifies air while providing minimal cooling for humid conditions
Fan Only Mode
Circulates air without cooling, perfect for mild days
Auto Mode
Automatically selects cooling or fan operation based on room temperature
Sleep Mode
Gradually adjusts temperature overnight for energy savings and comfort
Turbo Mode
Maximum cooling power for quick temperature reduction
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't turn on | Power issue, circuit breaker tripped | Check power cord connection, reset circuit breaker |
| Poor cooling performance | Dirty filter, blocked airflow, low refrigerant | Clean air filter, clear obstructions, contact service |
| Water leaking inside | Improper installation, clogged drain | Check unit level, clear drain channels |
| Unusual noises | Loose parts, debris in fan, compressor issue | Tighten mounting screws, clear debris, contact service |
| Remote not working | Dead batteries, signal obstruction | Replace batteries, ensure clear line of sight |
| Unit cycles on/off frequently | Dirty filter, thermostat issue, oversized for room | Clean filter, check thermostat settings |
Error Codes
- E0: Room temperature sensor error - Check sensor connection
- E1: Evaporator temperature sensor error - Contact service
- E2: Communication error - Power cycle unit
- E3: Outdoor temperature sensor error - Contact service
- E4: Compressor overload - Wait 3 minutes and restart
- E5: High pressure protection - Clean filters and coils
Manual Downloads
Current Model Manuals
RAV-SM562UT-E
6,000 BTU Window AC
RAV-SM802UT-E
8,000 BTU Window AC
RAV-SM1022UT-E
10,000 BTU Window AC
RAV-SM1222UT-E
12,000 BTU Window AC
Popular Previous Models
RA-W0821CRU
8,000 BTU Window AC
RA-W1021CRU
10,000 BTU Window AC
RA-W1221CRU
12,000 BTU Window AC
RA-W1421CRU
14,000 BTU Window AC